Show Categories
32
0
Measurements of Heat and Combustion Products in Reduced-Scale Ventilation-Limited Compartment Fires
http://fire.nist.gov/bfrlpubs/fire07/PDF/f07023.pdf
2007
A series of new reduced-scale compartment fire experiments were conducted, which included local measurements of temperature and species composition. The measurements are unique to the compartment fire literature. By design, the exper
5db98f7543fdd
31
1
yjdy posted Oct 22 '19 at 3:54 am
DIN 54837:2007
Testing of materials,small components and component sections for rail vehicles - Determination of burning behaviour using a gas burner
https://www.beuth.de/en/standard/din-54837/102054822

Calibration board
3mm thick stainless steel plate, welded 1mm diameter k-type thermocouple.
X6CrNiTi18-10 stainless steel; equivalent to the national standard 0Cr18Ni10Ti, Japan SU
5dae6f610eed1
recent by yjdy  ·  Oct 22 '19 at 3:57 am
116
0
BS EN 13238:2010
Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
Building material sample pretreatment
https://shop.bsigroup.com/ProductDetail/?pid=000000000030166839

Pretreatment environment:
23+ -2 degrees, 50+ -5%
Requirements: At least 48 hours, until the weight; once every 24 hours, the quality does not ex
5da885aac5d95
55
0
ISO 11925-3:1997
Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 3: Multi-source test
https://www.iso.org/standard/21805.html

Introduce other types of flames.
Simulate fire sources in all types of life; two types of fire sources, diffused (more natural) and premixed fires
Gas source, propane, Note: The flow meter should
57
0
admin posted Oct 17 '19 at 4:06 pm
Bunsen burners are common fire test instruments, such as UL94, which typically use methane as a gas and the flame is blue.
But blue is the subjective feeling of the human eye, and the color is related to the background and lighting.
Is there a more objective way to evaluate the color of the flame?

The photo below is:

01.mp4


5da882ea59267
34
0
yjdy posted Oct 17 '19 at 3:07 pm
The oxygen consumption principle test method is based on a simple physical fact that a certain amount of oxygen is consumed to generate a heat release amount.
For organic liquids and gaseous fuels with combustion products of CO2, H2O, HF, HCl, Br2, SO2 and N2, scholars believe that these bonds are similar because the energy generated during combustion is mainly caused by breaking CC bonds or C
44
0
The wire does not extend the test standard GB/T 18380, and the external standard IEC/EN 60332-1 series.

Examples of instrument types are as follows:

British FTT

Flame Propagation Test for a Single Insulated Cable
IEC/EN 60332-1

The FTT EN 60332-1 and IEC 60332-1 tests for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the r
5da492a844802
32
1
lyping posted Oct 14 '19 at 4:07 pm
Chapter 22
Cotton Swab Test for Thermal Acoustic Insulation Blankets
Chapter 22
Chapter 22.pdf

Cotton Swab Test for Thermal Acoustic Insulation Blankets
22.1 Scope
This nonregulatory, industry screening test is intended for use in determining the resistance of thermal acoustic insulation films to flame propagation when tested with alcohol dipped cotton swabs.

recent by lyping  ·  Oct 14 '19 at 4:08 pm
43
1
lyping posted Oct 14 '19 at 4:05 pm
C26 alloy plate
Chapter 26 New
Test Method to Determine the Flammability and Flame Propagation Characteristics of Magnesium Alloy
Chapter 26

Test Method to Determine the Flammability and Flame Propagation Characteristics of Magnesium Alloy
26.1 Scope
26.1.1 Applicability
This test method evaluates the ignition resistance and flammability of magnesium alloy when used in the c
recent by lyping  ·  Oct 14 '19 at 4:06 pm
28
1
Relationship between sponge smoldering and density

PU foam for ordinary furniture, the burning phenomenon is similar, continuous smoldering more than 45min!

Low density easy to pass smoldering test

Low density, over; common packaging sponge; 22.1g, 31x14x4.4cm, 11.6kg/m3

Medium density, however, the smoldering time exceeds 45 minutes;
Sponge - Taobao - Zhejiang - 'High Density
recent by lyping  ·  Oct 14 '19 at 3:56 pm
63
1
BS 5852-2:1982
Fire tests for furniture. Methods of test for the ignitability of upholstered composites for seating by flaming sources
Status : Confirmed, Current Published : August 1982 Replaced By : BS 5852:1990

*Equivalent test in BS 5852-2006; general purpose
Butane fire, wood fire;
Judgment: Part:
Smoldering, 2,3 butane fire, extinguished within 30 minutes; 4, 5, 6, 7 wo
recent by lyping  ·  Oct 14 '19 at 3:51 pm
159
3
DIN 54837:2007

Testing of materials,small components and component sections for rail vehicles - Determination of burning behaviour using a gas burner

https://www.beuth.de/en/standard/din-54837/102054822

DIN 50014-1985

Climates and their technical application; standard atmospheres

1985

Combustible test reference, select standard environment, 23 degrees, 50% humidity 2 envir
recent by lyping  ·  Oct 14 '19 at 11:39 am
92
0
BS 5852 has several similar standards, but the instrument accessories are basically the same.

Mainly the sofa steel frame: one big and one small.



BS 5852 Example of a shelf; BS and EN differ in the large steel plate at the edge!

5852-2006; EN 1021-1, two more pieces of 'iron', up and down.

Standard requirements for interior space 28x6mm









Ga
5da295ff9382e
105
0
lyping posted Oct 13 '19 at 4:08 am
ASTM E1352-16

Red Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

https://www.astm.org/Standards/E1352.htm

ASTM E1352-2008a
Standard Test Method for Resistance to Smoke Combustion of Composite Furniture with Modeled Upholstered
*Similar to ASTM E 1353-08; equivalent NFPA 260
Standard Test Methods for Cigarette Ignition
5da294bd23823
323
0
BS EN 13501-1:2018
Fire classification of construction products and building elements. Classification using data from reaction to fire tests
https://shop.bsigroup.com/ProductDetail/?pid=000000000030348263

BS EN 13501-1:2007+A1:2009
Fire classification of construction products and building elements. Classification using test data from reaction to fire tests


The following are
5da1e13fa732d
Categories
Actions
Hide topic messages
Enable infinite scrolling
All posts under this topic will be deleted ?
With selected deselect topics
Pending draft ... Click to resume editing
Discard draft