Electric Cables
Wire does not ignite a single burning test instrument

The wire does not extend the test standard GB/T 18380, and the external standard IEC/EN 60332-1 series.

Examples of instrument types are as follows:

British FTT

Flame Propagation Test for a Single Insulated Cable
IEC/EN 60332-1

The FTT EN 60332-1 and IEC 60332-1 tests for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. The apparatus is supplied as a complete System incorporating all the features necessary for ease of use and safety. It conforms to IEC/ EN 60332-1-2 (flame propagation) and IEC/EN 60332-1-3 (test for flaming droplets).
IEC/EN 60332-1 Test Apparatus

The IEC/EN 60332-1 uses a test flame of specified height and colour, obtained with gas supplied at a suggested back pressure and flow rate. As mass flow controllers are used with this FTT apparatus, no specific back pressure is required. A thermal The sensor is positioned over the flame, and the time for the temperature of the sensor to increase from 100 ° C to 700 ° C is determined. The time is used to confirm the heat-evolution profile of the test flame of 1kW.

With mass flow meter, no pressure gauge or back pressure is required. A thermocouple is integrated on the burner to measure the temperature rise time.
5da492a844802
5da492aa1b7e1

The wire does not extend the test standard GB/T 18380, and the external standard IEC/EN 60332-1 series. Examples of instrument types are as follows: British FTT Flame Propagation Test for a Single Insulated Cable IEC/EN 60332-1 The FTT EN 60332-1 and IEC 60332-1 tests for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW flame application. The apparatus is supplied as a complete System incorporating all the features necessary for ease of use and safety. It conforms to IEC/ EN 60332-1-2 (flame propagation) and IEC/EN 60332-1-3 (test for flaming droplets). IEC/EN 60332-1 Test Apparatus The IEC/EN 60332-1 uses a test flame of specified height and colour, obtained with gas supplied at a suggested back pressure and flow rate. As mass flow controllers are used with this FTT apparatus, no specific back pressure is required. A thermal The sensor is positioned over the flame, and the time for the temperature of the sensor to increase from 100 ° C to 700 ° C is determined. The time is used to confirm the heat-evolution profile of the test flame of 1kW. With mass flow meter, no pressure gauge or back pressure is required. A thermocouple is integrated on the burner to measure the temperature rise time. ![5da492a844802](serve/attachment&path=5da492a844802) ![5da492aa1b7e1](serve/attachment&path=5da492aa1b7e1)
edited Oct 14 '19 at 4:27 pm
43
0
1
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft